Archivo:.460 Steyr cartridge-full model MNr°0001.stl

Contenido de la página no disponible en otros idiomas.
De Wikipedia, la enciclopedia libre

Ver la imagen en su resolución original(5120 × 2880 píxeles; tamaño de archivo: 925 kB; tipo MIME: application/sla)

Resumen

Descripción
English: The 3D model of a cartridge in caliber .460 Steyr
Deutsch: Ein 3D Modell einer Patrone im Kaliber .460 Steyr
Fecha Tomada el 21 de noviembre de 2019
Fuente Trabajo propio
Casing: Size specifications were taken from the C.I.P data sheet, the percussion cap and stamped information is not included in the file
Projectile: The projectile was designed using this image as guideline. The projectile is not complete and needs fine tuning!
Autor D-Kuru
Permiso
(Reutilización de este archivo)
I, D-Kuru the author of this 3D model file, release it under the following licence:
w:es:Creative Commons
atribución compartir igual
Este archivo se encuentra bajo la licencia Creative Commons Attribution-Share Alike 3.0 Austria.
Eres libre:
  • de compartir – de copiar, distribuir y transmitir el trabajo
  • de remezclar – de adaptar el trabajo
Bajo las siguientes condiciones:
  • atribución – Debes otorgar el crédito correspondiente, proporcionar un enlace a la licencia e indicar si realizaste algún cambio. Puedes hacerlo de cualquier manera razonable pero no de manera que sugiera que el licenciante te respalda a ti o al uso que hagas del trabajo.
  • compartir igual – En caso de mezclar, transformar o modificar este trabajo, deberás distribuir el trabajo resultante bajo la misma licencia o una compatible como el original.


Attribution, disclaimer and additional Information:

Attribution:
Attribute me as "D-Kuru from Wikimedia Commons" or "D-Kuru/Wikimedia Commons". Second suggestion is preferred. You can find an example of how the image could be used in the „Disclaimer“ section. You can also visit the help page Commons:Reusing content outside Wikimedia for further information.

Used program:
This 3D model file was created using Blender.
Author: D-Kuru/Wikimedia Commons
Licence: CC-BY-SA-3.0-AT


Disclaimer:
Even I'm the only copyright holder of this two-dimensional work I can't exclude that third parties or local and/or international law may can restrict the reuse of this 3D model file. Possible restrctions could be due to personality rights, copyright (e.g. on buildings) and/or law such as the "Freedom of panorama".

Hyperlinks, other licences and additional information:
Even hyperlinks to my user page on Wikimedia Commons and this page are not required, they are requested. Also not required is a notification if you use this 3D model file anywhere but it nice to hear from you.
If you want to use my 3D model file under different licenceconditions you can cantact me on my talkpage or you can send me a mail.
I upload all my files in the highest possible resolution and/or bitrate so I can't offer higher resoluted images and/or better quality for my video and/or audio files. However, if you want to have an image from a different angle you can contact me and I can see if I can help you.

Keep in mind that this text does not affect the other usage conditions of the licence (could be „Share Alike“, „make clear to others the license terms of this work“, etc.) in any way! On the right side you can see an example of how the image could be used correctly according to the licenceconditions.

 
Esta imagen fue creada con Blender.

Leyendas

Añade una explicación corta acerca de lo que representa este archivo

Elementos representados en este archivo

representa a

application/sla

26f18eaaf2639ded38c9c96e444314d7ea582f0e

2880 píxel

5120 píxel

Historial del archivo

Haz clic sobre una fecha y hora para ver el archivo tal como apareció en ese momento.

Fecha y horaMiniaturaDimensionesUsuarioComentario
actual17:27 21 nov 2019Miniatura de la versión del 17:27 21 nov 20195120 × 2880 (925 kB)D-Kuru{{Information |Description= {{en|The 3D model of a cartridge in caliber ''.460 Steyr''}} {{de|Ein 3D Modell einer Patrone im Kaliber ''.460 Steyr''}} |Source= {{own work}} <br>'''Casing:''' Size specifications were taken from the [https://www.cip-bobp.org/homologation/uploads/tdcc/tab-i/tabical-en-page151.pdf C.I.P data sheet], the percussion cap and stamped information is not included in the file<br>'''Projectile:''' The projectile was designed using [http://deutsches-jagd-lexikon.de/index.p...

La siguiente página usa este archivo:

Uso global del archivo

Las wikis siguientes utilizan este archivo: