Archivo:Kepler-13Ab.jpg

Contenido de la página no disponible en otros idiomas.
De Wikipedia, la enciclopedia libre

Ver la imagen en su resolución original ‎(3850 × 5100 píxeles; tamaño de archivo: 1,67 MB; tipo MIME: image/jpeg)

Este es un archivo de Wikimedia Commons, un depósito de contenido libre hospedado por la Fundación Wikimedia. Más abajo se reproduce su página de descripción con la información sobre su origen y licencia.

Resumen

Descripción

This artist’s impression shows the seething hot planet Kepler-13Ab that circles very close to its host star, Kepler-13A. Seen in the background is the star's binary companion, Kepler-13B, and the third member of the multiple-star system is the orange dwarf star Kepler-13C.

The exoplanet is classified as a hot Jupiter but is actually six times more massive than Jupiter. Unlike chilly Jupiter, this exoplanet is one of the hottest known of the hot Jupiters, with a dayside temperature of more than 2700 °C. Another difference between Jupiter and Kepler-13Ab is that the exoplanet is so close to its star that it is tidally locked. One side keeps a permanent face to the star, and the other side is perpetually dark.

On the nighttime side the planet's immense gravity pulls down titanium oxide and precipitates as snow. Observations of the planet's atmospheric temperature profile made with the NASA/ESA Hubble Space Telescope represent the first time astronomers have detected this precipitation process, called a "cold trap," on an exoplanet. Without titanium oxide to absorb incoming starlight on the daytime side, the atmospheric temperature grows colder with increasing altitude. Normally, titanium oxide in the atmospheres of hot Jupiters absorbs light and reradiates it as heat, making the atmosphere grow warmer at higher altitudes. The Kepler-13 system is 1730 light-years from Earth.

The research teams consists of Thomas Beatty, Ming Zhao, Jason Wright, and Ronald Gilliland (Pennsylvania State University, University Park), Nikku Madhusudhan (University of Cambridge, U.K.), Angelos Tsiaras (University College London, U.K.), and Avi Shporer and Heather Knutson (California Institute of Technology, Pasadena, California).
Fecha 27 October 2017
Fuente https://esahubble.org/images/opo1736a/
Autor NASA, ESA, and G. Bacon (STScI)
Permiso
(Reutilización de este archivo)
w:es:Creative Commons
atribución
atribución
 ESA/Hubble images, videos and web texts are released by the ESA under the Creative Commons Attribution 4.0 International license and may on a non-exclusive basis be reproduced without fee provided they are clearly and visibly credited. Detailed conditions are below; see the ESA copyright statement for full information. For images created by NASA or on the hubblesite.org website, or for ESA/Hubble images on the esahubble.org site before 2009, use the {{PD-Hubble}} tag.
Conditions:
  • The full image or footage credit must be presented in a clear and readable manner to all users, with the wording unaltered (for example: "ESA/Hubble"). Web texts should be credited to ESA/Hubble (except when used by media). The credit should not be hidden or disassociated from the image footage. Links should be active if the credit is online. See the usage rights Q&A section on the ESA copyright page for guidance.
  • ESA/Hubble materials may not be used to state or imply the endorsement by ESA/Hubble or any ESA/Hubble employee of a commercial product or service.
  • ESA/Hubble requests a copy of the product sent to them to be indexed in their archive.
  • If an image shows an identifiable person, using that image for commercial purposes may infringe that person's right of privacy, and separate permission should be obtained from the individual.
  • If images or visuals are changed significantly from the original work (apart from resizing, cropping), we suggest that the changes are mentioned after the credit line. For example "Original image by ESA/Hubble (M. Kornmesser), warping and recolouring by NN".

Notes:

  • Note that this general permission does not extend to the use of ESA/Hubble's logo, which shall remain protected and may not be used or reproduced without prior and individual written consent of ESA/Hubble.
  • Also note that music, scientific papers and code on the esahubble.org site are not released under this license and can not be used for non-ESA/Hubble products.
  • By reproducing ESA/Hubble material, in part or in full, the user acknowledges the terms on which such use is permitted.
w:es:Creative Commons
atribución
Este archivo está disponible bajo la licencia Creative Commons Atribución 4.0 Internacional.
Atribución: ESA/Hubble
Eres libre:
  • de compartir – de copiar, distribuir y transmitir el trabajo
  • de remezclar – de adaptar el trabajo
Bajo las siguientes condiciones:
  • atribución – Debes otorgar el crédito correspondiente, proporcionar un enlace a la licencia e indicar si realizaste algún cambio. Puedes hacerlo de cualquier manera razonable pero no de manera que sugiera que el licenciante te respalda a ti o al uso que hagas del trabajo.

Leyendas

Añade una explicación corta acerca de lo que representa este archivo

Elementos representados en este archivo

representa a

Kepler-13 Ab

Historial del archivo

Haz clic sobre una fecha y hora para ver el archivo tal como apareció en ese momento.

Fecha y horaMiniaturaDimensionesUsuarioComentario
actual07:52 13 may 2023Miniatura de la versión del 07:52 13 may 20233850 × 5100 (1,67 MB)Юрий Д.К.{{Information |Description=This artist’s impression shows the seething hot planet Kepler-13Ab that circles very close to its host star, Kepler-13A. Seen in the background is the star's binary companion, Kepler-13B, and the third member of the multiple-star system is the orange dwarf star Kepler-13C. The exoplanet is classified as a hot Jupiter but is actually six times more massive than Jupiter. Unlike chilly Jupiter, this exoplanet is one of the hottest known of the hot Jupiters, with a day...

La siguiente página usa este archivo:

Uso global del archivo

Las wikis siguientes utilizan este archivo:

Metadatos

Este archivo contiene información adicional, probablemente añadida por la cámara digital o el escáner usado para crearlo o digitalizarlo.

Si el archivo ha sido modificado desde su estado original, pueden haberse perdido algunos detalles.

Obtenido de «https://es.wikipedia.org/wiki/Archivo:Kepler-13Ab.jpg»