Archivo:Breitling Orbiter 3 gondola.jpg

Contenido de la página no disponible en otros idiomas.
De Wikipedia, la enciclopedia libre

Ver la imagen en su resolución original(1201 × 1005 píxeles; tamaño de archivo: 293 kB; tipo MIME: image/jpeg)

Resumen

Descripción

First Nonstop Flight Around The World by Balloon Date of Milestone: March 21, 1999 Vehicle: Breitling Orbiter 3 Gondola Manufacturer: Cameron Balloons, Bristol, England, 1998

Artifact Location: Smithsonian Institution, National Air and Space Museum, Milestones of Flight Gallery

On March 1, 1999, Bertrand Piccard and Brian Jones lifted off from the Swiss alpine village of Chateau d?Oex in the Breitling Orbiter 3 balloon. On March 21, 1999?19 days, 21 hours, and 55 minutes later?they landed in the Egyptian desert after traveling 45,755 kilometers (28,431 miles) and completing the first nonstop flight around the world in a balloon.

The success of Breitling Orbiter 3 was built upon two previous attempts: Breitling Orbiter in 1997 and Breitling Orbiter 2 in 1998. Those experiences enabled the Breitling team to develop trustworthy technical systems and a basic strategy in which Piccard and Jones would pilot their balloon up to altitudes of 11,000 meters (36,000 feet) and to where jet stream winds would drive it across the Pacific at up to 176 kilometers (105 miles) per hour.

Support for this exhibit was provided by Breitling SA and Federal Express Corporation.

Design Features:

Construction: The gondola is made of Kevlar and carbon fiber material. Cabin air: After takeoff the gondola was pressurized with a nitrogen-oxygen mixture to reduce the risk of fire. Enough reserves were carried to repressurize the gondola four times. Pressurization: Cabin pressure dropped as the balloon climbed. At 10,000 meters (33,000 feet), the cabin pressure equaled the atmospheric pressure at 3,000 meters (10,000 feet). Temperature: Burners maintained the cabin temperature at 15 °C (59 °F). Solar panels: Solar panels beneath the gondola recharged the onboard lead batteries that provided electrical power. Instrumentation: The forward cockpit contains the controls and instruments needed to monitor and operate the aircraft and systems. The crew used satellite-based systems to communicate and navigate. Accommodations: The central part of the cabin contains a single bunk and storage area. An ingenious pressure-operated toilet is screened off with a curtain at the rear of the craft.

Gondola:

Length: 5.4 m (17 ft 10 in) Height: 3.1 m (10 ft 3 in) Weight, empty: 2,000 kg (4,400 lb) Fuel: Propane

Manufacturer: Cameron Balloons, Bristol, England, 1998
Fecha
Fuente 222_2218
Autor dbking

Licencia

w:es:Creative Commons
atribución
Este archivo está disponible bajo la licencia Creative Commons Atribución 2.0 Genérica.
Eres libre:
  • de compartir – de copiar, distribuir y transmitir el trabajo
  • de remezclar – de adaptar el trabajo
Bajo las siguientes condiciones:
  • atribución – Debes otorgar el crédito correspondiente, proporcionar un enlace a la licencia e indicar si realizaste algún cambio. Puedes hacerlo de cualquier manera razonable pero no de manera que sugiera que el licenciante te respalda a ti o al uso que hagas del trabajo.
Esta imagen, originalmente subida a Flickr, fue revisada el January 1, 2008 por el administrador o revisor File Upload Bot (Magnus Manske), quien comprobó que el archivo se encontraba disponible en Flickr bajo la licencia nombrada en dicha fecha.

Leyendas

Añade una explicación corta acerca de lo que representa este archivo

Elementos representados en este archivo

representa a

image/jpeg

d8ffadc1b77b55071be32e70e91363b6f06dbf9d

1005 píxel

1201 píxel

Historial del archivo

Haz clic sobre una fecha y hora para ver el archivo tal como apareció en ese momento.

Fecha y horaMiniaturaDimensionesUsuarioComentario
actual12:15 1 ene 2008Miniatura de la versión del 12:15 1 ene 20081201 × 1005 (293 kB)File Upload Bot (Magnus Manske) {{Information |Description= First Nonstop Flight Around The World by Balloon Date of Milestone: March 21, 1999 Vehicle: Breitling Orbiter 3 Gondola Manufacturer: Cameron Balloons, Bristol, England, 1998 Artifact Location: Smithsonian Institutio

La siguiente página usa este archivo:

Uso global del archivo

Las wikis siguientes utilizan este archivo:

Metadatos