Resultados de la búsqueda

Para más opciones de búsqueda, vea Ayuda:Búsqueda.

No hay resultados que cumplan los criterios de búsqueda en este sitio.

Resultados de la Wikipedia en inglés.

  • section, the baffles and (rubber) wipes of the suppressor. There is a knurled knob at the rear that serves as the bolt handle, which unlocks when rotated…
    13 kB (1397 palabras) - 19:59 3 may 2024
  • top right of the picture of the three-day barograph can be seen a silver knurled knob. This is to adjust the barograph so that it correctly reflects the…
    8 kB (1075 palabras) - 13:49 13 may 2022
  • shell. There are many bar sizes and profiles, mostly either round and knurled or hexagonal. There is a some compatibility, but it is not universal. Some…
    11 kB (1499 palabras) - 18:34 11 ene 2024
  • controls for focusing, typically a large knurled wheel to adjust coarse focus, together with a smaller knurled wheel to control fine focus. Other features…
    52 kB (5972 palabras) - 03:47 11 abr 2024
  • to DIN 1804 Active DIN 464 Knurled thumb screws, high type Active DIN 466 Knurled nuts, high type Active DIN 467 Knurled nuts, low type Active DIN 471…
    110 kB (151 palabras) - 21:38 30 abr 2024
  • left of the pinion. Corrections in azimuth were achieved by turning the knurled knob at the right edge of the worm gear located at the bottom of the gun…
    20 kB (3053 palabras) - 19:27 15 nov 2023
  • bass drums. The standard clutch uses a knurled collar partially threaded below the cymbal and a pair of knurled rings above it. The collar is tightened…
    22 kB (3022 palabras) - 01:41 3 abr 2024
  • reserve of 36 hours and a 30-second daily accuracy rate. It is straight-knurled and includes the "dimple" typical of similar period Benrus U.S. military…
    11 kB (1461 palabras) - 15:00 19 ene 2024
  • floor tom, and a 22-inch bass drum with black gloss hoops and a 14-inch knurled steel snare. By 1993 his Superunknown era kit arrived, a black gloss kit…
    47 kB (5092 palabras) - 07:27 14 may 2024
  • a target 7 feet (2.1 m) away. The design had been finalised on 18 April 1859 but was amended on 1 May to replace the grip with a knurled leather design…
    27 kB (3824 palabras) - 22:25 26 feb 2024
  • in a variety of unexpected positions. Riders almost always use either knurled/grip taped aluminum or plastic pegs to stand on to manipulate the bike…
    18 kB (2994 palabras) - 07:30 11 abr 2024
  • metal halves welded together to form a cylinder. At the front end is a knurled metal cap which is used to retain the removable barrel. The cold-swaged…
    51 kB (6046 palabras) - 08:09 26 may 2024
  • improves traction and repeatability, as compared to the use of smooth or knurled drive rollers. Chassis dynamometers can be fixed or portable, and can do…
    35 kB (4688 palabras) - 07:43 28 abr 2024
  • balancing in a variety of body and bicycle positions. Riders almost always use knurled aluminum pegs to stand on to manipulate the bike into even stranger positions…
    27 kB (4155 palabras) - 14:31 26 abr 2024
  • Vertical percussive crushing Crushing by hammering Monolithic millstone with knurled wheel: percussive milling with uncoordinated movements Peruvian Stone Batán…
    80 kB (10 057 palabras) - 20:21 15 may 2024
  • heat. #1702 Hi Compression Head - Trumpet shaped - High Compression - knurled top - 4 fins on early, 3 fins on later (fastest), 2 fins on most recent…
    62 kB (8456 palabras) - 21:59 4 jun 2023
  • in two common lengths, 32 and 41 mm (1.3 and 1.6 in) and are sometimes knurled or coated to improve players' grip. Others are designed to retract slightly…
    56 kB (6553 palabras) - 22:42 23 may 2024
  • but 40 inches (100 cm) hoses are standard for Octopus regulators and 7 feet (2.1 m) hoses are popular for technical diving, particularly for cave and…
    102 kB (13 964 palabras) - 06:14 13 may 2024