Resultados de la búsqueda
Para más opciones de búsqueda, vea Ayuda:Búsqueda.
Quizás quisiste decir: keeling
Si consideras que este artículo debería existir, conoces nuestros pilares, dispones de fuentes fiables y sabes indicarlas como referencias, puedes crearlo, opcionalmente usando nuestro asistente.
instrumentos de cuerda), las pinzas de ropa son utilizadas a menudo para encolar kerfing durante la producción de guitarras, mandolinas, y otros instrumentos de…14 kB (1843 palabras) - 01:01 23 may 2024
Resultados de la Wikipedia en inglés.
- Look up kerf in Wiktionary, the free dictionary. Kerf is the width of a saw cut. Kerf may also refer to: Kerf, molten metal and metal oxide blown out…768 bytes (146 palabras) - 13:46 29 abr 2019
- (3 mm) kerf will produce only seven sections, plus one that is 7/8 inch (21 mm) too short when factoring in the kerf from all the cuts. The kerf depends…33 kB (4829 palabras) - 21:38 11 may 2024
- of material removed (that is, the kerf) by each machine in the cutting process. To adjust for this variation of kerf, the self-similar property of the…18 kB (2222 palabras) - 07:06 5 abr 2024
- Marcel Kerff (redirección desde Marcel Kerf)Marcel Kerff (2 June 1866 – 7 August 1914) was a Belgian cyclist who participated in the 1903 Tour de France, where he finished sixth. At the age of 48…2 kB (99 palabras) - 11:49 5 ene 2024
- "wave" set. As for other saws they are set from side to side to provide a kerf or clearance when sawing, but the set of a hacksaw changes gradually from…8 kB (1076 palabras) - 14:38 6 dic 2023
- original gate was donated to the Six String Nation project, and now serves as kerfing on a guitar located there. In the 1990 movie Bird on a Wire, Mel Gibson…3 kB (377 palabras) - 20:47 11 sep 2023
- most often found in steel-string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow…88 kB (11 266 palabras) - 10:21 11 may 2024
- can cause a partially cut board to move, twist, or have the saw blade's kerf close up and bind the blade. Poor blade or fence alignment, operator error…9 kB (1069 palabras) - 19:52 13 feb 2024
- Kerf is an outdoor series of two pigmented cast concrete sculptures by Thomas Sayre, installed at the MAX Orange Line's Southeast Tacoma/Johnson Creek…4 kB (175 palabras) - 14:31 13 jun 2023
- classical guitar body are very thin, so a flexible piece of wood called kerfing (because it is often scored, or kerfed so it bends with the shape of the…66 kB (7736 palabras) - 12:44 24 may 2024
- a single reference line for one side of the kerf, while others provide two lines to reflect the total kerf width. A blade guard is a cover for the teeth…13 kB (2088 palabras) - 14:57 14 feb 2024
- Canada into the Six String Nation project. Parts of this wood now serve as kerfing strips on either side of the end block in the interior of Voyageur, the…59 kB (6430 palabras) - 14:13 21 abr 2024
- much more complex shapes to be cut, and to compensate for the angle of the kerf to leave the angled wall on the stock instead of on the finished part. Punch…30 kB (3235 palabras) - 13:08 22 may 2024
- specialized software and 3-D machining heads, complex shapes can be produced. The kerf, or width, of the cut can be adjusted by swapping parts in the nozzle, as…39 kB (4432 palabras) - 18:53 14 may 2024
- minimum radius of a curve is determined by the width of the band and its kerf. Most bandsaws have two wheels rotating in the same plane, one of which is…15 kB (2174 palabras) - 05:24 22 may 2024
- teeth, called rakers, designed to clean out the cut strips of wood from the kerf. Crosscut saws generally have smaller teeth than rip saws. Some saws, such…15 kB (2034 palabras) - 17:40 30 ene 2024
- trained on the metal, burning it into a metal oxide that flows out of the kerf as dross. Torches that do not mix fuel with oxygen (combining, instead, atmospheric…50 kB (7019 palabras) - 15:38 20 may 2024
- "G"-series also included the full GAB system combining front and back braces, kerfing, and neck and end blocks. The "G"-series were crafted in Canada. The "AG"…5 kB (437 palabras) - 06:55 10 dic 2021
- hand plane; a jointer plane. joist kerf The gap left when material is removed by a saw cut. The width of the kerf is equal to the set of the saw. keyhole…27 kB (3161 palabras) - 04:28 7 feb 2024
- very little wood is wasted by the saw blade thickness, known as the saw kerf. Some manufacturers use a very wide knife to slice off the thin veneer pieces…7 kB (915 palabras) - 16:47 25 may 2024
- usually not be flat. Knots also prevent riving thus the need for rip cuts. A kerf is the opening in the wood made by the saw. Types of hand saws used to make…4 kB (587 palabras) - 17:38 30 ene 2024