Resultados de la búsqueda
Para más opciones de búsqueda, vea Ayuda:Búsqueda.
No hay resultados que cumplan los criterios de búsqueda en este sitio.
Si consideras que este artículo debería existir, conoces nuestros pilares, dispones de fuentes fiables y sabes indicarlas como referencias, puedes crearlo, opcionalmente usando nuestro asistente.
Resultados de la Wikipedia en inglés.
- form of a very shallow counterbore. As mentioned above, the cutters that produce counterbores are often also called counterbores; sometimes, to avoid ambiguity…5 kB (606 palabras) - 16:48 13 nov 2023
- to be fixed to the head of the screw after it has been driven home. Counterbores are not required for these fasteners. This system is more common with…13 kB (1895 palabras) - 14:57 29 feb 2024
- broaches. Rotary cutting tools include drill bits, countersinks and counterbores, taps and dies, reamers, and cold saw blades. Other cutting tools, such…7 kB (975 palabras) - 13:25 10 jul 2023
- a blind rivet nut, or rivnut, is a one-piece internally threaded and counterbored tubular rivet that can be anchored entirely from one side. It is a kind…2 kB (257 palabras) - 22:44 1 dic 2023
- endmills, and form cutters; various drills, reamers, taps, countersinks, counterbores, and core drills; various turning tools, form tools, and threading tools;…14 kB (1688 palabras) - 05:14 18 may 2024
- where the bolt's head will sit, which is often done by cutting a shallow counterbore, just deep enough "to clean up"—that is, only enough material is removed…5 kB (715 palabras) - 21:10 4 oct 2023
- with or below the surface of the surrounding material (by comparison, a counterbore makes a flat-bottomed hole that might be used with a socket-head capscrew)…8 kB (980 palabras) - 20:30 6 mar 2024
- features, such as two holes. C/T Correlation / Tracking C'BORE or CBORE or counterbore CSK or CSINK or countersink CTN, ctn carton depth, deep, down Defines…62 kB (376 palabras) - 08:39 10 may 2024
- typically flanged, and may fit into standard Allen hex socket cap screw counterbores molded or machined into parts to be fastened. Compared to Allen hex sockets…96 kB (9923 palabras) - 07:24 2 may 2024
- or both feed and axial motions may be concurrent. Straight holes and counterbores are produced by moving the tool parallel to the axis of workpiece rotation…13 kB (1910 palabras) - 14:43 21 ene 2024
- Soviet Union, but also its various satellite nations. Many of these were counterbored post-war. Model 1891/59 Carbine: Commonly called "91/59s," the M1891/59s…97 kB (11 249 palabras) - 21:02 24 may 2024
- following are some related processes that often accompany drilling: Counterboring This process creates a stepped hole in which a larger diameter follows…20 kB (2650 palabras) - 13:51 5 may 2024
- changed from gas ring on yoke to cylinder, 13-3 (1982) eliminated cylinder counterbore and pinned barrel/small change in cylinder length to 1.62", 13-4 (1988)…6 kB (574 palabras) - 21:53 21 feb 2024
- Year Modifications 57 1964 Introduction 57-1 1982 Eliminate cylinder counterbore and pinned barrel, change in cylinder length to 1.67″ 57-1 1986 Nickel…10 kB (1096 palabras) - 18:38 11 abr 2024
- thickness of its walls in the exit region. It was found that inserting a counterbore here reduced wetting. Today, the nozzles are designed to have a minimum…30 kB (3629 palabras) - 04:22 12 may 2024
- DOWN ARROWHEAD ⌔ SECTOR ⌤ UP ARROWHEAD BETWEEN TWO HORIZONTAL BARS ⌴ COUNTERBORE 4 ⌄ ⌔ ⌤ ⌴ ⌄ ⌔ ⌤ ⌴…78 kB (409 palabras) - 00:23 12 abr 2024
- bits. Other tools that are commonly used in a drill bushing include counterbores, countersinks, and reamers. They are designed to guide, position, and…9 kB (871 palabras) - 19:50 10 mar 2022
- operations, like truing, making fillets, chamfers, countersinking, counterboring, etc. It may also receive various surface treatments and finishes. The…3 kB (296 palabras) - 17:30 20 sep 2021
- ground diameter and the original diameter is either straight, to form a counterbore, or angled, to form a countersink. The advantage to this style is that…52 kB (7973 palabras) - 19:11 12 may 2024
- main and connecting rod bearings and different connecting rods. The counterbore in the rear flange of the crankshaft was 1+1⁄4 inches (32 mm) diameter…22 kB (2821 palabras) - 14:35 13 sep 2023
- Non-edged, Non-powered 5130: Hand Tools, Power Driven 5133: Drill Bits, Counterbores, and Countersinks: Hand and Machine 5136: Taps, Dies, and Collets; Hand…33 kB (3769 palabras) - 18:26 9 feb 2024